RITM Industry

address+38 044 331 91 18
mon-fri: 09.00-18.00
e-mail: sales@ritmindustry.com

x

Price request

Implement Industry Ideas
+38 044 223 09 23
+38 050 102 89 91
sales@ritmindustry.com

Compression load cells

HAEHNE

  • Tension force sensor / strain gauge / stainless steel

KAT

Article: 00027414

Tension force sensor / strain gauge / stainless steel

Tension force sensors of the type KAT were specifically developed for direct measurement of forces acting in cables, wires, ropes, or tapes. They can best be installed in places where the design of the machine already requires the use of deflection rollers or guide rollers.
This is e. g. the case in
situations such as
- Cable making machines
- Stranding machines
- Foil capacitor manufacturing
- Label printing machinery etc.
By using a screw instead of a roller to lead the force into the shaft, the tension sensor KAT can also be used to measure compression forces. Strain gauges applied to the active surfaces of the
cantilever beam measure the acting forces.
The strain gauge bridge is supplied with stabilized DC voltage from a strain gauge amplifier such as the Measuring Amplifiers AME2 or MV125 for further processing of the measuring signals.
The signals at the output terminals of the amplifier are proportional to the tensile force in the material. The signals can be digitally displayed or used as actual values in closed loop controls.
Mechanical stops limit the measuring deflection and provide overload protection. The axial cable entry facilitates mounting
the sensor to the machine frame.

Specifications

  • Type: tension
  • Technology: strain gauge
  • Other characteristics: stainless steel
  • Rated force: Min.: 25 N

Other items

In this category | In this category, (HAEHNE)

Leave request for price calculation right now, we will send you best prices.

LLC "RITM INDUSTRY" 34, Verkhovnoy Rady Blvd. Kyiv, UA-02094 +38 044 223 09 23 info@ritmindustry.com
RITM Industry © 2015 -