Implement Industry Ideas
  • Panel-mount plug and socket / wall-mounted / built-in / high-power
  • Panel-mount plug and socket / wall-mounted / built-in / high-power
  • Panel-mount plug and socket / wall-mounted / built-in / high-power
  • Panel-mount plug and socket / wall-mounted / built-in / high-power
  • Panel-mount plug and socket / wall-mounted / built-in / high-power
  • Panel-mount plug and socket / wall-mounted / built-in / high-power

Article: 00029858

Panel-mount plug and socket / wall-mounted / built-in / high-power

Plug and socket connectors for ports and other industrial applications

Our plug and socket connectors have the following specific characteristics:
They are sealed, and can be flooded if correctly closed and installed.
No condensation in formed if the built-in space heater and thermostat are properly maintained.
The accessible surfaces are free of burrs and sharp edges.
The position of the ground contact cannot be adjusted by the user.
Polarity cannot be changed, because it is maintained by a locating plug.
During plug-in a connection to the switch is impossible as long as the locating plug has not been brought into plug-in position. During any handling power and tension are switched off therefore exits no danger for personnel or instalations during this procedure.
There is a clip to prevent the plug being accidentally removed form the base.
Earthing is before phase connection. The lock mechanism mentioned under item 6. Also prevents the switch being connected if there is no physical connection between the earth contacts of the base (socket) and the plug.This means earthing is guaranteed, otherwise the switch cannot be connected.
Collective contact connection.
Magneto thermal and differential protection are available.
Large contact surfaces and cross sections with little pressure, thus avoiding premature wear during use. The silver plated copper parts prevent over heating even after many years of use.
Switch box and plug socket made of cast iron, are highly resistant in marine environment.

Specifications

  • Shape: panel-mount, wall-mounted, built-in
  • Other characteristics: high-power
  • Current: Min.: 125 A
  • VAC: Min.: 1 kV

Other items

In this category | In this category, (Auxema Stemmann)

Leave request for price calculation right now, we will send you best prices.