Implement Industry Ideas
  • Rectangular fire damper
  • Rectangular fire damper

FK-EU

Article: 00050740

Rectangular fire damper

Rectangular fire damper
Complies with the European product standard DIN EN 15650
DoP / FK-EU / DE / 002
EG-Certificate of Conformity
BC1 - 606 - 4645 - 15650.11 - 4651
Tested for fire resistance properties according to EN 1366-2
Classification according to EN 13501-3
Reduced differential pressure and sound power level
Dry mortarless installation with installation kit
Remote controlled with spring return actuator
Integration into the centralised BMS with TROXNETCOM
In case of a fire, fire dampers shut automatically to prevent the propagation of fire and smoke through ductwork to adjacent designated fire compartments. Type FK-EU fire dampers are tested to EN 1366-2 and comply with EN 15650.
Local requirements and building inspectorate approvals are essential in the country where the units are to be installed.

Correct approved installation locations are in solid walls and ceiling slabs, on the face of solid walls, adjacent to and remote from solid walls, upright on solid ceiling slabs, in lightweight partition walls, in lightweight fire walls, and in shaft walls. Installation in horizontal and vertical ducts. Airflow direction is not critical. When installed in walls or ceiling slabs combustible ventilation ducting may be connected directly to the fire damper. In the case of fire, the damper is triggered at 72 °C or 95 °C (for use in warm air ventilation systems) either by a fusible link or thermoelectrically with a spring return actuator. The release mechanism is accessible and can be tested from the outside.
The fire dampers have two inspection accesses.

Specifications

  • Configuration: rectangular

Other items

In this category | In this category, (TROX)

Leave request for price calculation right now, we will send you best prices.