RITM Industry

address+38 044 331 91 18
mon-fri: 09.00-18.00
e-mail: sales@ritmindustry.com

x

Price request

Implement Industry Ideas
+38 044 223 09 23
+38 050 102 89 91
sales@ritmindustry.com

Heat exchangers: condensers, evaporators

OMICRON

  • Evaporator / electron beam / process
  • Evaporator / electron beam / process

EFM 6

Article: 00058897

Evaporator / electron beam / process

Evaporation area > 50 mm
Crucible capacitiy up to 10 cm3
Evaporation from wires, rods or crucibles
Integrated cooled shutter
Water cooling for minimum pressure rise
A FOCUS product
The EFM 6 evaporator extends the EFM product range onto a larger scale. With a NW 63 CF (4.5" OD) base flange and a crucible capacity of up to 10 cm3, the EFM 6 holds about ten times as much material as the EFM 3. Already at a short working distance the evaporation area is larger than 50 mm in diameter, which makes the EFM 6 ideally suited for substrates between 2" and 4". Featuring an integrated flux monitor and shutter, the EFM 6 is a unique tool in the medium-sized evaporator range, not only suitable for the growth of sub-monolayers but also for thick bond pads etc. For extended service cycles, the EFM 6 is equipped with a double filament.
The required high power to heat the large crucibles is supplied by the EVC 1200.

Specifications

  • Type: electron beam
  • Laboratory/process: process

Other items

In this category | In this category, (OMICRON)

Leave request for price calculation right now, we will send you best prices.

LLC "RITM INDUSTRY" 34, Verkhovnoy Rady Blvd. Kyiv, UA-02094 +38 044 223 09 23 info@ritmindustry.com
RITM Industry © 2015 -