Hydrocyclone / desanding - RITM Industry

address+38 044 331 91 18
mon-fri: 09.00-18.00
e-mail: sales@ritmindustry.com

KCSS

Article: 00062782

Hydrocyclone / desanding

Krebs DeSanders
Krebs DeSanders and Separators are devices specially designed for the continuous removal of fine sand, scale and other undesireable solids from a liquid stream. Quality materials, advanced design and the finest workmanship assure the client of the highest possible sand recoveries and a long, trouble-free operating life.

A ?separator" is used primarily in a closed system that is under high pressure, or where very fine separations are not required where liquid loss must be minimized, or where the solids loading is low. Krebs Desanders are known as KD or KS units.

Sand-laden fluid is fed into the cylindrical chamber where it is subjected to the vortex action resulting from its tangential entry. As the water spirals inward towards the vortex finder extremely high centrifugal forces move the sand toward the cylinder wall. Sand particles then progress in a spiral path toward the apex of the cone and are finally discharged through a tangential orifice into the accumulator tank.

The specially designed feed entry aids in pre-classifying sand before entering the cylindrical section. This causes the sand particles to enter the cylinder with a very smooth flow pattern along the wall thus minimizing solids-induced turbulence and the familiar ricochet action found in conventionally fed cyclones. Energy is, therefore, converted to centrifugal rather than wasted on turbulent forces that can upset the vortex action and intensify wear on the internal surfaces of the unit.

Price request
Print

Specifications

Options: desanding

Other items

In this category | In this category, (FLSmidth Dorr-Oliver Eimco)

Leave request for price calculation right now, we will send you best prices.

RITM Industry © 2015 -