Implement Industry Ideas
  • Grinding motor spindle / manual

500 series

Article: 00126966

Grinding motor spindle / manual

Due to its robust design and high precision, the series 500 motor grinding spindle is suitable for all applications related to state-of-the-art grinding technology. Our grinding spindles are manufactured from special materials ensuring a high dimensional stability even at extreme application conditions. Only high-­precision bearings installed under ­preload are used as bearings. The concentricity on the taper is Rotation
Thanks to our locking device on the ­taper, our grinding spindles can be ­operated in CW and CCW mode. ­However, the use of our original accessories is a prerequisite.
Lubrication
Grease life-time lubrication
Motor
The motor can be controlled via a frequency converter up to max. 100 Hz.
The motor is connected to the spindle shaft via a Rotex coupling.
Sealing
The tool end is sealed by means of a specially tested labyrinth seal. It protects the spindle bearings against soiling. The spindles can be used horizontally and vertically alike.
Scope of supplies
Operating manual, clampscrew or nut to fasten the grinding wheel flange

Specifications

  • Function: grinding
  • Drive mechanism: manual
  • Rotational speed: Min.: 970 rpm (6094.69 rad.min-1)

Other items

In this category | In this category, (Heinz Fiege GmbH & Co. KG)

Leave request for price calculation right now, we will send you best prices.