RITM Industry

address+38 044 331 91 18
mon-fri: 09.00-18.00
e-mail: sales@ritmindustry.com

x

Price request

+38 044 223 09 23
+38 050 102 89 91
sales@ritmindustry.com

Torque Sensors

Montronix

  • Rotary torque sensor / non-contact / with integrated electronics

AT100 AccuTorque

Article: 00135080

Rotary torque sensor / non-contact / with integrated electronics

The AccuTorque torque sensor provides a direct measurement of torque and thrust. AccuTorque can be used to detect tool failures and to verify process quality. Available in 3 versions, the AccuTorque sensor is incorporated into a rotating shaft, such as a spindle or tool holder, where it transmits the signal across a 5 mm air gap to a non-rotating stator. The stator receives the data and transfers it to the amplifier for signal conditioning before being sent to the control unit for processing.
Torque measurements are primarily used in rotating tooling applications where power monitoring is inadequate. Applications may include drilling, tapping or machines with multi-spindle heads. AccuTorque is used to detect tool failures and verify process quality such as thread depth and hole.
Thrust is used to detect a missing tool and determine that a process is performing as expected.

The AccuTorque sensor is supplied with a signal conditioning amplifier. This amplifier is sealed (IP67 rating), and can be placed within the machining environment. The amplifier is attached to the non-rotating stator using a 5 meter cable. Cables up to 30 meters long can connect the amplifier to the controller.

Specifications

  • Type: rotary
  • Other characteristics: non-contact, with integrated electronics

Other items

In this category | In this category, (Montronix)

Leave request for price calculation right now, we will send you best prices.

LLC "RITM INDUSTRY"

1-B Magnitogorska Str. 

Kyiv, UA-02094

+38 044 223 09 23

info@ritmindustry.com

RITM Industry © 2015 -