RITM Industry

address+38 044 331 91 18
mon-fri: 09.00-18.00
e-mail: sales@ritmindustry.com

x

Price request

+38 044 223 09 23
+38 050 102 89 91
sales@ritmindustry.com

Electric Linear Actuators

Hurst

  • Electric cylinder / DC

6 - 24 VDC, max. 10 lbs | LAS, LBS series

Article: 00044275

Electric cylinder / DC

Maximum Load:LAS 10 lbs., LBS 6.5 lbs.
Rotor Assembly:Threaded to accept a std. 1/4"-16 ACME 2G right-hand screw (Class 2G RH)
Insulation Class:Class A (105°C)
Lead Wire:LAS/LBS 6 leads 24 AWG (approx. 8.5 inches [215.9 mm])
Operation Ambient Temp: -10°C to +40°C (approx.)
Motor Construction:Die cast end bells and ball bearing construction
Shaft Length:8 inches [203.2 mm] max with travel 5.25 inches [133.35 mm]
Applications:Pushing, Pulling, Lifting, and Positioning
Note:Typical data subject to change without notification
Addtional Information:
The LAS and LBS stepping motor/actuator offers an economical choice of controlled linear motion for pulling, pushing, or lifting. The rotor assembly contains a nut which accepts a standard 1/4" diameter, 16 TPI, RH Acme screw giving a Class 2G fit.
LAS and LBS series stepping motors have rotor step angles of 7.5° (LAS) or 15° (LBS) with linear resolutions of 768 or 384 steps per inch, respectively. They may be driven with the Hurst controllers as shown in the table below.
The motors are reversible and have die cast end bells and ball bearing construction.
Notes: Standard winding is unipolar with 6 lead wires.
Bi-polar windings may be specified.

Specifications

  • Type: electric
  • Other characteristics: DC

Other items

In this category | In this category, (Hurst)

Leave request for price calculation right now, we will send you best prices.

LLC "RITM INDUSTRY"

1-B Magnitogorska Str. 

Kyiv, UA-02094

+38 044 223 09 23

info@ritmindustry.com

RITM Industry © 2015 -