RITM Industry

address+38 044 331 91 18
mon-fri: 09.00-18.00
e-mail: sales@ritmindustry.com

x

Price request

+38 044 223 09 23
+38 050 102 89 91
sales@ritmindustry.com

Ball Bearings

Luoyang Huigong Bearing Technology Co

  • Ball bearing / angular-contact / thin-section

Article: 00009785

Ball bearing / angular-contact / thin-section

Compared with C-type bearing, A-type angular contact ball bearing has an enough radial clearance to form a sufficient contact angle to carry the axial load. The contact angle for the standard bearing is 30°.
A notable feature of A-type bearing ring is its assembling method. There is a slope at the rib of either of the bearing ring, usually of the outer ring. With the temperature differences on inner and outer ring, the inner and outer ring, balls and the cage can be assembled together to form a non-separable bearing. The bearing can carry the axial load, as well as a greater radical load. Under a certain axial load, the inner and outer rings of bearing can be preload for adjusting.
Compared with C-type bearing, more balls can be installed into A-type bearing,with this assembly method and a larger contact angle can be formed, to obtain a greater axial load carrying capacity.
Due to its bearing capacity in one direction, the bearing should be installed symmetrically in pairs with other bearing, to set and ensure the contact angle and the smallest axial movement under an alternating axial load.

Specifications

  • Rolling element: ball
  • Geometry: angular-contact, thin-section
  • Inside diameter: Min.: 10 mm
  • Outside diameter: Min.: 280 mm

Other items

In this category | In this category, (Luoyang Huigong Bearing Technology Co)

Leave request for price calculation right now, we will send you best prices.

LLC "RITM INDUSTRY"

1-B Magnitogorska Str. 

Kyiv, UA-02094

+38 044 223 09 23

info@ritmindustry.com

RITM Industry © 2015 -