RITM Industry

address+38 044 331 91 18
mon-fri: 09.00-18.00
e-mail: sales@ritmindustry.com

x

Price request

+38 044 223 09 23
+38 050 102 89 91
sales@ritmindustry.com

Access Control Gates Rising Barriers Retractable Bollards

Cpe Ape

  • Boom barrier / automatic

5.5m (18') | FLEX-18

Article: 00002085

Boom barrier / automatic

FLEX-18 Barrier Gate (New G89)

High-speed automatic rising barrier especially designed for access control in public and private parking lots as well as industrial sites. The Flex-18 barrier has been developed to ensure an economical vehicle access control for lanes up to 5.5m (18 Feet), while providing dependable efficient control and safe every day use.

Description:

Housing made of folded and welded 10-gauge steel sheet.
Removable upper hood. Upper hood fixed by two latches designed to resist vandalism.
Lateral door side mounted for easy access to mechanism.
Extruded aluminum arm.
Electromechanical assembly including:
120VAC single-phase motor.
Lubricated speed reduction gearbox with worm screw.
Balance achieved by built-in extension spring. No external counterweights.
Crankshaft-rod device ensuring smooth, progressive operation.
Mechanical locking of barrier arm in extreme positions (Closed/Open), with rubber bumpers.
Easily reversible main shaft.
Easily adjustable limit switches with mechanical and controller overrun protection.
Barrier arm shaft mounted on two pillow blocks with welded arm support.
Shaft configuration allows easy barrier model inversion from left to right.
Built-in heater.
Easily removable 10 or 26 IO PLC logic control to ensure automatic closing of the barrier either by detector and loop or by push button. Opening of the barrier by push button, card reader or other optional controls. The 26 IO controller provides for connection of up to three optional loop detectors.
Barrier anchoring by means of expanding bolts or threaded rods, thus allowing easy alignment with road-way (anchoring means available as option, to be defined depending on the type of ground). Fits over existing G89E bolt patterns.
Seam welded cabinet is constructed from 10 gauge galvanized steel with polyester powdered finish for superior corrosion resistance.
Dimensions: Approximately 42" Height x 15" Wide x 15" Deep

Technical Characteristics:

Shaft output left or right, to be specified with order.
Standard power supply 120V AC single phase ( ±8%).
Frequency 50-60HZ.
Reversing Motor 1/3 HP - 1625 RPM.
Operating time 2 -4 seconds depending on arm length.
Worm screw type life lubricated gearbox.
Compression springs available in 1 to 3 spring configurations depending on arm length.
Programmable logic controller with LCD display, allows for uploading of logic changes.
Run timer, safety edge timer, auto close timer (jumper enabled).
Operating Temp. - 35° to +70° C.(-31° to 150°F)
Net weight from 90 to 96 Kg (200-215Lbs), (arm included) depending on arm length.

Specifications

  • Type: boom
  • Other characteristics: automatic

Other items

In this category | In this category, (Cpe Ape)

Leave request for price calculation right now, we will send you best prices.

LLC "RITM INDUSTRY"

1-B Magnitogorska Str. 

Kyiv, UA-02094

+38 044 223 09 23

info@ritmindustry.com

RITM Industry © 2015 -