• Coalescing filter / particulate / for liquids / air
  • Coalescing filter / particulate / for liquids / air

SaltSep

Article: 00003006

Coalescing filter / particulate / for liquids / air

Salt particles, either solved in liquid or as dry crystalline state are the most unwelcomed visitors for your ambient air intakes and downstream equipment. If not controlled they will reduce the life of the duct system and downstream equipment due to their highly corrosive effects. Air-borne salt laden droplets are too small (1µm to appr. 600µm) to be completely eliminated with a single stage system. For efficient protection against salt a minimum of 2 stages (vane type separator + coalescer / vane type separator + fine filter) is required.

ENSEPATEC has developed a broad line of separators that can be supplied in combination with a two or multiple stage particulate filters to provide maximum protection against sea spray and salt particulates at minimal pressure loss and maximum filter life.

Where to use?
Control of salt laden droplets and particulates are most commonly found on offshore (vessels or rigs) or coastal applications, however if you are located in a climate that has snow, salt crystals used on roads and highways can become airborne and winds will carry these salts into nearby ambient air intakes. Any air intake exposed to salt spray or salt particulates require maximum protection to prevent damaging effects from corrosion.

Why SaltSep?
SaltSep first provides maximum protection against intake of droplets. Our vertical vane designs remove virtually 100% of all droplets 15 microns in diameter and larger at very low pressure loss and at higher design velocities than typical horizontal louvers.

Specifications

  • Designed for: for liquids, air
  • Type: coalescing, particulate
  • Applications: suction
  • Other characteristics: compact
  • Filtration size: Min.: 1 µm

Other items

In this category | In this category, (Ensepatec)

Leave request for price calculation right now, we will send you best prices.