RITM Industry

address+38 044 331 91 18
mon-fri: 09.00-18.00
e-mail: sales@ritmindustry.com

x

Price request

+38 044 223 09 23
+38 050 102 89 91
sales@ritmindustry.com

Endoscopes Borescopes Fiberscopes Videoscopes

Jenoptik Industrial Metrology Germany Gmbh

  • Surface inspection optical system
  • Surface inspection optical system
  • Surface inspection optical system
  • Surface inspection optical system
  • Surface inspection optical system

HOMMEL-ETAMIC IPS B100, IPS B10

Article: 00047575

Surface inspection optical system

The HOMMEL-ETAMIC IPS100 is a bore inspection sensor system. An image of the bore’s inside surface is generated after a 360° circular optic is advanced into it. Represented as rings, the circumferential lines in the bore are highlighted in the image.

A high resolution CMOS imager continuously scans the image. The generation of an undistorted image of the inner surface of the bore is achieved by the simultaneous forward advancing of the inspection sensor and circular scanning. The IPS-10 can be advanced rapidly due to the high scanning rate which enables short inspection cycle times.

Specifications

  • Options: surface inspection

Other items

In this category | In this category, (Jenoptik Industrial Metrology Germany Gmbh)

Leave request for price calculation right now, we will send you best prices.

LLC "RITM INDUSTRY"

1-B Magnitogorska Str. 

Kyiv, UA-02094

+38 044 223 09 23

info@ritmindustry.com

RITM Industry © 2015 -