Implement Industry Ideas
  • Oil mist collector / coalescing

Article: 00048681

Oil mist collector / coalescing

1. Type of technology
Physical principle of coalescence.

2. Contaminants which can be removed
Mists and vapours of lubricating oil, cooling oil, inks, asphalt, DOP. Emissions from plastic and textile processes, etc.

3. Emission limits possible
Emission limits should be examined case-by-case; it is possible to reach collection efficiencies over 90%.

4. Description of the equipment and/or process
The following is the description of an DOP abatement system.

Purpose of this plant is to remove and to recover the DOP present in a given volume of process gases and released (in our specific case) by certain conveyor belt coating and bonding lines during production.

Industry in general often gives rise to process gases containing contaminating substances that are difficult to capture and disposed of. Moreover these fumes may not be discharged freely in the atmosphere. Hence it is also necessary to proceed to clean them in order to reduce the quantity of contaminants to below regulatory limit values or acceptable values for direct reuse in the production cycle.
In this case the above requirement involves considerable investments and running costs which are not always feasible in industries in the small/medium scale.
In the case of DOP, the monodisperse medium par excellence (*), whose physical properties have given rise to one of the current official standards concerned with the determination of the degree of efficiency of almost all the currently produced HEPA filters, the problem of separating its particles from the air is very complex and highly variable depending on its concentration and temperature of the fumes.

Specifications

  • Application: oil
  • Type: coalescing
  • Flow rate: 60000 m³/h (2118879.97 ft³/h)

Other items

In this category | In this category, (AMBOSO)

Leave request for price calculation right now, we will send you best prices.