• Hydraulic power unit with electric motor / for construction sites / stationary
  • Hydraulic power unit with electric motor / for construction sites / stationary
  • Hydraulic power unit with electric motor / for construction sites / stationary

max. 3625 PSI, 3 - 30 kW | HMG series

Article: 00062286

Hydraulic power unit with electric motor / for construction sites / stationary

For use with hydraulic excavators we recommend our hydraulic driven DYNASET magnet power and control system for 230VDC as described on the brochure below. It is sold as a complete package i.e. generator, control, pressure compensator, solenoid activated flow valves, and push buttons. The only extras required would be magnet cable for running up the boom, plus necessary hydraulic hoses from the excavator to the DYNASET (usually two) and miscellaneous wiring to complete the installation. We can also provide complete installation services for the DYNASET.

Models include:

DYNASET HMG 3 KW, requires 5 GPM (18lpm)
DYNASET HMG 6 KW, requires 8.5 GPM (32lpm)
DYNASET HMG 10 KW, requires 12 GPM (46lpm)
DYNASET HMG 12 KW, requires 15 GPM (56lpm)
DYNASET HMG 15 KW, requires 18 GPM (68lpm)
DYNASET HMG 20 KW, requires 25 GPM (95lpm)
DYNASET HMG 30 KW, requires 32.5 GPM (123lpm)
**Recommended flow at approx. 3050psi**

Specifications

  • Power source: with electric motor
  • Applications: for construction sites
  • Other characteristics: stationary
  • Operating pressure: 3050 psi
  • Nominal power: Min.: 3 kW (4.02 hp)
  • Flow rate: Min.: 5 us gal/min (18.93 l/min)

Other items

In this category | In this category, (Gensco Equipment)

Leave request for price calculation right now, we will send you best prices.