Implement Industry Ideas
  • 2-channel sensor interface module

StrainBUSter

Article: 00063783

2-channel sensor interface module

Key features

- Available as Starter kit
- Strain gauge, Pt-100 and potentiometric sensors
- CAN Interface
- 18 Bit A/D converter resolution
- Up to 5 Km cable
- Selectable bus-speed
- Daisy chain upto 60 devices

There is an increasing tendency to investigate the behaviour of large constructions under varying load conditions. Examples are: bridges, wind turbines, tower cranes, etc. Usually it is quite inconvenient to apply half- or full straingauge bridges onto such constructions, for which reason mostly single (1/4 bridge) gauges are utilized. This, however, usually implies cumbersome wiring to the inputs of the (remote) measuring amplifiers.

StrainBUSter has been developed to solve these problems by placing the measuring circuit in the direct vicinity of each point of measurement. Here all signal conditioning is done, after which all measured values are being transmitted via a CAN bus to one convenient central place, thus building one decentralized system. In this way, up to 120 measured values can be transmitted very reliably over longer distances.

Each StrainBUSter module has 2 separate input channels. The single straingauge, or the Pt100 sensor, is connected through a 3-wire connection, eliminating cable losses at the input side.

Specifications

  • Options: 2-channel sensor

Other items

In this category | In this category, (Peekel Instruments)

Leave request for price calculation right now, we will send you best prices.