RITM Industry

address+38 044 331 91 18
mon-fri: 09.00-18.00
e-mail: sales@ritmindustry.com

x

Price request

Implement Industry Ideas
+38 044 223 09 23
+38 050 102 89 91
sales@ritmindustry.com

Plain bearings, bushings

SPIETH-MASCHINENELEMENTE GmbH & Co KG

  • Radial plain bearing / hydrodynamic
  • Radial plain bearing / hydrodynamic

GLM series

Article: 00107993

Radial plain bearing / hydrodynamic

The radial plain bearing GLM may be used in the headstock with an open housing. They are adjustable by nature and hence they can be directly mounted in the headstock bores. Axial guiding is provided between GLM which adjusted for correct play. It is tightened using a Spieth Locknut opposite to the spindle end. The sealing against the oil loss is done by the V-rings.

It can be used with the work-piece spindle head in addition closed housing and bearing flange sleeve. The 2 GLM bearing are mounted in bearing flange sleeves in order to achieve radial guidance in the stable spindle head design. A spindle collar located outside the GLM bearing, on the working side is used to prove axial guidance. The assembly play between bearing flange sleeve on the side of the spindle drive and housing borehole is eliminated using the Spieth clamping set.

Specifications

  • Type: radial
  • Length: Min.: 40 mm
  • Outside diameter: Min.: 55 mm
  • Inside diameter: Min.: 30 mm

Other items

In this category | In this category, (SPIETH-MASCHINENELEMENTE GmbH & Co KG)

Leave request for price calculation right now, we will send you best prices.

LLC "RITM INDUSTRY" 34, Verkhovnoy Rady Blvd. Kyiv, UA-02094 +38 044 223 09 23 info@ritmindustry.com
RITM Industry © 2015 -