RITM Industry

address+38 044 331 91 18
mon-fri: 09.00-18.00
e-mail: sales@ritmindustry.com

x

Price request

+38 044 223 09 23
+38 050 102 89 91
sales@ritmindustry.com

Pocket Filters

Keller Products

  • Bag filter / coolant / oil / aluminum
  • Bag filter / coolant / oil / aluminum

BA / SB series

Article: 00110802

Bag filter / coolant / oil / aluminum

In-Line Bag Filters To 1 Micron
IN-LINE BAG FILTERS REMOVE CHIPS & FINES FROM
CUTTING OIL OR COOLANT TO AS FINE AS 1 MICRON
Get these benefits:
In-line bag filters protect to-the-spindle, through-the-spindle and through-the-tool coolant systems, preventing tool breakage & machine shutdowns
Cleaning cutting oil or coolant greatly extends tool life
Keller bag filters are easily installed in-shop in the oil or coolant lines
Low cost, long life filter bags are easily replaced in a couple of minutes



Benefits of Filtering Cutting Oil or Coolant
Removing chips and fines from coolant or cutting oil before fluid enters the distribution manifold prevents blockage in the lines and spray nozzles and ensures that the desired fluid flow rate and distribution is maintained throughout the run. In addition, running with solids-free cutting fluid will increase tool life and minimize the requirement to shut down for machine adjustments and maintain dimensional specifications


Advantages of Keller Bag Filters
Keller bag filter housings with felted polyester bags provide excellent solids holding capacity to ensure uninterrupted runs. Filter bags are easily changed without tools in a couple of minutes. The economical filter bags are available in ratings from 1 micron to 100 microns at the same prices. 25 micron bags are supplied as standard, or the customer may specify a different micron rating. The filter housings, available in 3/4" and 1-1/2" pipe sizes, are easily shop-installed downstream from the oil or coolant pump. Maximum operating pressure is 300 psig.

Specifications

  • Designed for: coolant, oil
  • Type: bag
  • Material: aluminum, stainless steel
  • Other characteristics: in-line
  • Filtration size: 1 µm
  • Operating pressure: Min.: 125 psi
  • Flow rate: Min.: 30 us gal/min (113.56 l/min)

Other items

In this category | In this category, (Keller Products)

Leave request for price calculation right now, we will send you best prices.

LLC "RITM INDUSTRY"

1-B Magnitogorska Str. 

Kyiv, UA-02094

+38 044 223 09 23

info@ritmindustry.com

RITM Industry © 2015 -