• Pressure transmitter with analog output / digital / 4-20 mA / flush
  • Pressure transmitter with analog output / digital / 4-20 mA / flush

OMNI-P

Article: 00113687

Pressure transmitter with analog output / digital / 4-20 mA / flush

Analog output, two switching outputs
?Clear, easily legible, illuminated LCD display
?Modifiable units in the display
?Designed for industrial use
Characteristics
The OMNI-P pressure transmitter / switch is intended for the
measurement of static and dynamic pressures in liquids and gases.
It consists of a pressure cell as a sensor, and an integrated
transformer.
A
sensor with a flush-front stainless steel membrane is used as the
transformer. The stainless steel membrane transmits the applied
pressure via an oil filling to a mono-silicon membrane with a
sputtered piezo-resistant measuring bridge made from polysilicon.
Because the membrane fits flush, there is a minimal risk of
contamination.
The pressure present is shown in the display and output as an
analog signal (0/4..20 mA or 0/2..10 V). In addition, if set limit
values are fallen short of or exceeded, this can be signalled by
means of two switching outputs and a red LED.
Because the complete upper part of the housing can be turned, it is
possible to simply and infinitely adjust the display and the cable
outlet.
By turning the programming ring to right or left, it is simple to
modify the parameters (e.g. switching point, hysteresis...). To
protect from unintended programming, it can be removed, turned
through 180 °, and replaced, or completely removed, thus acting as
a key.

Specifications

  • Output signal: with analog output, digital, 4-20 mA
  • Mounting: flush
  • Protection level: IP67
  • Applications: for liquids and gases, industrial
  • Other characteristics: stainless steel
  • Process temperature: Min.: -20 °C (-4 °F)
  • Pressure range: Min.: 0 Pa (0 psi)

Other items

In this category | In this category, (Ghm Messtechnik)

Leave request for price calculation right now, we will send you best prices.