RITM Industry

address+38 044 331 91 18
mon-fri: 09.00-18.00
e-mail: sales@ritmindustry.com

x

Price request

Implement Industry Ideas
+38 044 223 09 23
+38 050 102 89 91
sales@ritmindustry.com

Dust collectors

DAS Environmental Expert

  • Wet type dust collector / pneumatic backblowing

EDC

Article: 00043187

Wet type dust collector / pneumatic backblowing

EDC Reduction Emissions of micro and nanoparticles at the Point-of-Use

As mentioned above, EDC is an electrostatic dust collector for treatment of micro and nanoparticle-containing or aerosol-containing process waste gases up to 90 m³/h as they accrue, for example, in solar cell manufacturing. The dust collector reduces particle emissions of even the finest particles up to 99.9 % and successfully prevents exhaust blockage. It can be used with the most abatement devices and can be equipped with an optional pressure controlled fan and an optional lye supply system. Access for operating and maintenance is from the front and back and operation costs and general safety can be optimised with a process tool interface.
Your Advantages

Efficient treatment of particle-containing or aerosol-containing waste gas flows
All solid particles suspended in liquid (no dry dust handling)
Extremely low particle emission
High safety standards (all critical parameters are sensor monitored)
Interface to upstream abatement systems

Technical Data

Measurements (D × W × H):
830 mm × 855 mm × 2100 mm
Access to maintenance area on front and
back side
Waste gas connection: 1 x DN100
Gas flows: max. 90 m³/h

Specifications

  • Technology: wet type
  • Backflushing: pneumatic backblowing
  • Output: 90 m³/h (3178.32 ft³/h)

Other items

In this category | In this category, (DAS Environmental Expert)

Leave request for price calculation right now, we will send you best prices.

LLC "RITM INDUSTRY" 34, Verkhovnoy Rady Blvd. Kyiv, UA-02094 +38 044 223 09 23 info@ritmindustry.com
RITM Industry © 2015 -