Permanent magnet electromagnetic brake / motor - RITM Industry

address+38 044 331 91 18
mon-fri: 09.00-18.00
e-mail: sales@ritmindustry.com

Article: 00106852

Permanent magnet electromagnetic brake / motor

Permanent magnet brakes, due to their relatively small construction size, are used particularly
in the MICROSTEP stepping motors of the design series SHS 39 / 200 ? xxxx.
Permanent magnet brakes are electromagnetic-ventilating brakes for dry run with nonpositive,
torsional-backlash-free effect, whose flux pattern is generated by permanent
magnets.
This is taken off (opened) in the electrified status through the opposite-pole magnetizing
coil and, in connection with the membrane spring on the armature part, a residual-torquefree
separation is assured independently of the installation location.
The permanent magnet brakes P1 are designed for rated operating voltage 24 V DC according
to insulation Class F (max. 155°C), and guarantee secure operation in temperature
ranges from 20° to 100°C. On request, versions in the insulation Class H (180°C) and other operating voltages are available.
The effect makes possible the connecting of shafts in voltage-free status or secure slowing-down of masses. In case of failure of
the operating voltage, the motor is held in its existing position.

Price request
Print

Specifications

Operation: permanent magnet electromagnetic
Product applications: motor
Torque: 2 Nm (1.48 ft.lb)

Other items

In this category | In this category, (MICROSTEP GmbH)

Leave request for price calculation right now, we will send you best prices.

RITM Industry © 2015 -