RITM Industry

address+38 044 331 91 18
mon-fri: 09.00-18.00
e-mail: sales@ritmindustry.com

x

Price request

+38 044 223 09 23
+38 050 102 89 91
sales@ritmindustry.com

Hydraulic Presses

Galbiati Group

  • Blanking press / lamination / hydraulic / high-speed

EP3

Article: 00062444

Blanking press / lamination / hydraulic / high-speed

EP3 Press for High Speed Blanking Magnetic Laminations
EP3 Press for High Speed Blanking Magnetic Laminations
Full blanking force under any condition
The flywheel is anchored to the side frame by means of a bushing in order to avoid stressing the shaft. Oversized, it allows blanking operations to be performed with the rated machine tonnage at very low speeds, lower than those allowed by other presses of equal force. The stiffness of the press bed also guarantees increased die life, a feature particularly advantageous when using hard metal dies.
Die Inspection
The quick lift, standard on all EP3 presses, allows the upper half of the die to be opened, very useful for inspecting dies and releasing jams eliminating the need for heating the tie rods. The bottom plate of the slide can be removed, leaving the slide in position.
Hydrostatic Lubrication of Bearings
In EP3 presses, bearing lubrication is guaranteed by introducing pressurized oil inside the shaft and allowing it to exit at the bearings. This system allows the hydrostatic support of the shaft with consequent reduction in backlash.

Specifications

  • Process type: blanking, lamination
  • Operation: hydraulic
  • Other characteristics: high-speed
  • Pressing force: Min.: 2500 kN
  • Opening: Min.: 500 mm

Other items

In this category | In this category, (Galbiati Group)

Leave request for price calculation right now, we will send you best prices.

LLC "RITM INDUSTRY"

1-B Magnitogorska Str. 

Kyiv, UA-02094

+38 044 223 09 23

info@ritmindustry.com

RITM Industry © 2015 -