• Signal amplifier / DIN rail / for sensors / single-channel

AM-TOP series

Article: 00005847

Signal amplifier / DIN rail / for sensors / single-channel

These units allow to amplify signals from NAMUR sensors or contacts. The delay time
and hold time respect the input signal are adjustable through potentiometers on the
front panel. Each output is electrically insulated from each other, from power supply
and from all the inputs. It is possible to configure them as N.O. or N.C. and use
them as PNP or NPN. They are protected against over voltages on lines, overload
and short circuit. On the 24V version is also possible to configure the OUT2 with the
same funtion of OUT1 or use it as remote failure indication. When used for NAMUR
sensors, the indication of failures is visible with a red LED on the front panel for interruptions
or short circuits on the input lines.
The configuration dip-switches are easily accessible removing the front panel.
Suitable for DIN rail mounting.
Technical data:
Supply voltage: see ordering references
Frequency of power supply: DC or 50 - 60 Hz
Power consumption max: see ordering reference
Working temperature: - 25 ÷ + 60° C
Storage temperature: - 40 ÷ + 80° C
Degree of protection: IP20
According to EN60947-5-6
Electromagnetic compatibility (EMC) according to EN61000-6-2/-4

Specifications

  • Type: signal
  • Configuration: DIN rail
  • Product applications: for sensors
  • Other characteristics: single-channel
  • Voltage: Min.: 24 V
  • Current: 300 mA

Other items

In this category | In this category, (Bdc Electronic)

Leave request for price calculation right now, we will send you best prices.