RITM Industry

address+38 044 331 91 18
mon-fri: 09.00-18.00
e-mail: sales@ritmindustry.com

x

Price request

Implement Industry Ideas
+38 044 223 09 23
+38 050 102 89 91
sales@ritmindustry.com

Belt conveyors

Gerhard Busch GmbH

  • Hinge belt conveyor / L / for waste
  • Hinge belt conveyor / L / for waste
  • Hinge belt conveyor / L / for waste
  • Hinge belt conveyor / L / for waste
  • Hinge belt conveyor / L / for waste

SF, HF series

Article: 00011515

Hinge belt conveyor / L / for waste

For guillotines with automatic waste removal device (ASE). The waste is discharged onto the initial cross conveyor (HF) installed under the guillotine. From here the waste is conveyed up (SF) into a bin.
The SF can be installed in three directions: straight away from the HF or right-angled to the left or righthand side.
Waste conveyor SF inline (one element) with a narrower transport width is offered alternatively ? installed at the left or right straight away from the guillotine.

Easy removal of cut waste with the new space saving conveyor SF-PT. A broadened lateral air table125x75cm has been installed to enable the positioning of the conveyor. A slightly raised funnel is fitted to the front side of the air table into which the waste is thrown for dropping into the bin of the conveyor placed underneath. Two conveying heights are available. The conveyer can be positioned right or left hand of the guillotine.

Specifications

  • Technology: hinge belt
  • Configuration: L
  • Applications: for waste
  • Speed: Min.: 0.3 m/s (0.98 ft/s)

Other items

In this category | In this category, (Gerhard Busch GmbH)

Leave request for price calculation right now, we will send you best prices.

LLC "RITM INDUSTRY" 34, Verkhovnoy Rady Blvd. Kyiv, UA-02094 +38 044 223 09 23 info@ritmindustry.com
RITM Industry © 2015 -